For small scale production, repairs and patching the Tape can be applied using a Heat Press or Household Iron. In this case the temperature needs to be on a medium / medium hot setting - the dwell time is the important factor and this can only be determined by experimentation - suggest in the region of 6 - 10 seconds with pressure applied. Ideally apply the Tape to a small piece of waste fabric first to test adhesion strength - after test application and allowing time for cooling pull the tape back and you should feel a strong resistance.
For a good seal to be achieved the temperature must be hot enough for the adhesive to be flowing / molten and pressure must be applied across the full width of the tape. Terms of Sales & Service. We value client service as well as product quality. Within 24 hours, We try our best to provide you happy solution by communication.Welcome to shop in my store, we carry thousand of excellent items, w. E always value client service as well as product quality. We will offer help to resolve your problems as fast as possible.
Replacement is available for wrong or defective item receipt within the first 30 days, it's free of extra charge. The item "22mm 25mm 28mm Seam Sealing Tape Iron On Hot Melt Wetsuit Tape Dry Suit Scuba 5M" is in sale since Thursday, November 1, 2018.
This item is in the category "Crafts\Sewing\Other Sewing". The seller is "starversal" and is located in Manchester. This item can be shipped worldwide.